Power Bounce Grip 2

Converts the T32 (or T20) into a grip type electronic flash unit. Consists of a bracket section and a grip section which contains

4C batteries to provide a power- ful supplementary power source.

The bounce head can be angled 90° up, 20° down, 60° right and 240° left allowing free choice of bounce and close-up flash photo- graphy. Electrical connection with the camera is made via the TTL Auto Cord T and TTL Auto Connector.

TTL Auto Cord T 0.3m, 0.6m, 2m, 5m

Used for off-camera flash opera- tion (e.g., bounce flash, multi- unit flash). Available in 4 dif-

ferent lengths.

M. Grip Cord

Connects the Motor Drive 1 (or Winder) with the shutter release incorporated in the bounce grip for comfortable motor-driven

flash photography.

Electronic Flash AC Adapters

Enables operation of the T10 Ring Flash 1 and its modelling lamp on AC current.

6V Power Pack 2

An auxiliary power source unit for the modelling lamp of the T10 Ring Flash or winder units. Powered by four D size batteries.

Electronic Flash AC Adapter 2

80

Page 81
Image 81
Olympus OM-2, zm2000qdk manual TTL Auto Cord T 0.3m, 0.6m, 2m, 5m, Grip Cord