The Down arrow key
The “Down arrow” key is used for scrolling down through the lines on the screen. It is also used to decrease certain fields when editing.
The Decimal Point and Insert key
The “Decimal Point” key is used when editing numeric fields. It is also used as an Insert key during program editing to insert additional steps and other field sets.
The Delete key
The “Delete” key is used during program editing to delete steps and stages.
The Pause key
The “Pause” key is used during program editing to insert a pause after a stage or to insert increment and decrement times and temperatures. It is also used to pause a program when it is running.
The Enter or Accept key
The “Enter” key is used to enter an operation or the edit mode. It is also used to ‘Accept’ a field or program change.
The Alpha/Numeric keys
The “Alpha/Numeric” keys are used to enter numbers and letters during programming. If it is a numeric field then numbers will be inserted; if it is an alpha field then letters will be inserted. Each key will cycle through the letters shown on the key (0 will insert a space). To insert a number, press and hold the appropriate key.
6. Programming the CYCLER
The table below illustrates the symbols which appear on the LCD display and the relevant keypad button to which they refer.
13
