When you have finished, press the “Enter” key to go back to the ‘Configuration’ menu.
Passwords
SettingsProgram defaults PasswordsSettings FormatPasswordsmemory Controller reset
The ‘Passwords’ function allows the administrator to change the ‘Admin password’ (which allows access to Configuration) and also to delete any passwords associated with programs.
Highlight ‘Passwords’ then press “Enter”
The screen will appear as opposite.
We suggest that you change the ‘Admin password’ at this stage in order to protect the configuration settings.
Use the “Up Arrow” key to highlight ‘Admin passwd’
Press “Enter” and type in the new password. Repeat to confirm and accept.
The screen will go back to the ‘Configuration’ menu.
To delete a password associated with a program, use the “Up Arrow” and “Down
Arrow” keys to highlight the program.
Press “Enter”
Press “Enter” again to delete the password.
Controller reset
SettingsProgram defaults PasswordsSettings PasswordsFormat memory
Format Memory
CONTROLLER RESET
This | will delete |
| |
all programsmethods |
| ] | |
[ | SURE ? | NO | |
[ | YES | ] | |
The ‘Format memory’ will delete all saved programs from the unit.
Highlight ‘Format memory’ then press “Enter”
To delete all the programs, press “Enter” Set ADMIN PASSWORD to 1234.
31
