Omega Engineering 20, 48, 30 ProgramsMethods00 Information Configuration, Set password to select

To edit a field or step in an existing program

ProgramsMethods[0][0] Information Configuration

[ , to select ]

DONNA [7] Run programmethod

View programmethod Edit programmethod Copy programmethod Delete programmethod

Set password

[ , to select ]

When the unit is switched on the display will show this screen.

If known, type in the ‘Speed dial’ number for the required program and press “Enter” This will take you directly to the required program.

If you do not know the ‘Speed dial’ number, press “Enter” to access the list of stored programs.

Either:

1.Scroll to the required program using the “Up Arrow” or “Down Arrow” keys

or

2.Type the first letter of the program name in the ‘New program’ field; this will then list all the program names

beginning with that letter. Use the “Up

Arrow” or “Down Arrow” keys to select the required program.

Press “Enter” to accept

The full set of options for a program is shown here; these are shown on the LCD screen three lines at a time.

Use the “Down Arrow” and/or the “Up

Arrow”keys to select the option you require.

Press the “Enter” key	to select the
option.

Edit a selected field or step

Select ‘Edit program’ and a screen similar to this will appear.

Use the “Down arrow” and/or the “Up

arrow” keys to select the field or step you want to edit.

You can now edit the active field or step by first pressing the “Enter” key

17