Omega Engineering 20 Information, Block s/nid, Unit s/n, S/w version, H/w version, Configuration

to select ]

Program Information

Pressing “Enter” while a program is

running will give information about the current run including which program is actually running and the unit status e.g. holding or ramping.

An example is shown here.

7. Information

The Information field on the front screen contains all the unit-specific information such as serial number and software version.

Press “Enter” information.

to access the unit

Block Type:		2048x0.25ml
Block s/nid	123456789139160-2
Unit s/n	GP0000C3C123456-0
S/w version		146.z.zz
H/w version		2.ZZ01
Comms address		1
Unit cycles		624
Block cycles		69

8. Configuration

The complete list is displayed here.

Warning! The Configuration software should only be accessed by designated personnel, as some parameters can be changed or may be lost when using it.

MethodsPrograms Information

Configuration

[ ,

[0]	The Configuration field on the front screen
	allows a system administrator access to

set up all the default settings for the programs, time and date settings and to change and remove passwords.

29