To copy a selected program
If you select ‘Copy program’ a screen similar to this will appear and the software will automatically give the program the next number until it is named.
Press “Enter” and type in a new name. You will then be able to edit the program as previously described.
To delete a selected program
If you select ‘Delete program’ a screen similar to this will appear.
Press “Enter” to delete the program or “End” to return to the program screen.
To set a password for a selected program
If you want to password protect the program so that other users cannot edit it, select ‘Set password’. A screen similar to this will appear.
Type in the password you wish to give it and press “Enter” . The program list will then display the key symbol next to the name to show that it is locked.
Other users will still be able to copy/view your program but not edit it.
Option 2: Creating a new program
A second option is to create a completely new program without using templates.
UNNAMED # | 105ºC | |
Heated lid |
| |
Preheat lid | off | |
Pause |
| off |
- - - - - - - - - - - | ||
In denat | 94.0ºC 5m00 | |
Hot Start |
| off |
- - - - - - - - - - - | ||
PostFin extnru | 72.0ºC | 5m00 |
PostFin hold | 10.0ºCºC | |
A number of typical values are
Heated lid temperature Preheat lid
Initial denaturation Hot start
Final extension Final hold
These values can be edited and the additional stages and steps required for cycling can be added by following the instructions detailed on the following pages.
19
