Input Range RA RB Gain Polarity
±5 VDC 10 Ω
Short Open ×1 Bipolar
±10 VDC 2 KΩ 2 KΩ ×1 Bipolar
±30 VDC 10 KΩ 2 KΩ ×1 Bipolar
±20 mA Short 249 Ω ×1 Bipolar
±20 mA Short 124 Ω ×2 Bipolar
±2 mA Short 1240 Ω ×2 Bipolar
6. Install resistors in RA and RB sockets for each channel as desired (see figures).
In voltage mode, RA and RB (installed by the user) form a resistor divider network. In current mode, RA is
always shorted, RB is shunted with a resistor. 8 channels can be configured alike with 16-pin, 8-resistor DIP-8
resistor networks. With no resistors, DBK15 provides 16 differential voltage inputs for +5 V full-scale inputs.
CL positions are used for bias resistors if necessary. Two differential measurement configurations can be used:
floating or referenced differential. Refer to the Signal Management chapter for more information.
DBK Option Cards and Modules 889094 DBK15, pg. 3