Onkyo L-DR7 34

■Connecting a CD recorder or VCR (CDR/VIDEO IN/OUT jacks)

You can connect the audio input and output of a CD recorder or VCR to these jacks. Connect the video output from the VCR to the TV.

To connect the L-DR7 to an Onkyo product that has an jack, select an appropriate input source using the [INPUT] button (page 42).

Connecting an Onkyo Separate Collection Series CD recorder

Connect the PDR-155’s CDR/VIDEO AUDIO IN jacks to the CDR-201A’s ANALOG OUTPUT jacks.

Connect the PDR-155’s CDR/VIDEO AUDIO OUT jacks to the CDR-201A’s ANALOG INPUT jacks.

Note that the available components may vary depending on the area.

Connecting other CD recorder or VCR models

Connect the PDR-155’s CDR/VIDEO AUDIO IN jacks to the analog audio output jacks of the CD recorder or VCR.

Connect the PDR-155’s CDR/VIDEO AUDIO OUT jacks to the analog audio input jacks of the CD recorder or VCR.

• Be sure to insert the cable plugs completely into the jacks. If the connection is incomplete, noise or malfunction may occur.

• Do not bundle the audio pin cables with the power cable and/or speaker cords. Otherwise, tonal quality may deteriorate.

• When you use an optical audio digital cable, do not bend or coil it tightly.

•After all connections are completed, insert the power cable plug into an appropriate AC outlet (page 40).

•The DIGITAL jack has a protective cap installed. When you use this jack, remove the cap. When you are not using this jack, be sure to replace the cap.

Incomplete

Insert completely

Digital recording from the PDR-155 to a CD recorder

Use an optical digital cable to connect the PDR-155’s DIGITAL OUT jack to a digital audio input jack on the CD recorder. If you are using the CDR-201A, use its DIGITAL INPUT 1 jack.