Making Antenna (Aerial) Connections

Connecting an FM outdoor antenna (aerial) (non-European models only)

If the FM reception is not very clear with the supplied antenna (aerial), connect an FM outdoor antenna (aerial) instead of the indoor FM antenna (aerial).

Connecting coaxial cable to a 75/300 ohm antenna (aerial) adapter

1Strip the end of the coaxial cable.

15 mm

6 3 6

mm mm mm

1/4 1/8 1/4

in. in. in.

5/8 in.

2With your fingernail or a small screw- driver, press the stoppers outward and remove the cover.

3Remove the transformer wire A from slit B and insert it into slit C.

Slit B

Wire A

Slit C

4Insert the end of the cable.

5 Clamp it in place with pliers.

Connecting a 300 ohm ribbon wire to a 75/300 ohm antenna (aerial) adapter

Loosen the screws and wrap the wire around these screws.

Then tighten the screws with a screwdriver.

Notes

•

Install the antenna (aerial) well away from tall build-

 

ings and in an area where FM stations can be

 

directly received.

•

Keep the antenna (aerial) away from noise sources

 

(neon signs, busy roads, etc.).

5

4

•

It is dangerous to put the antenna (aerial) close to

 

power lines. Keep it well away from power lines,

 

transformers, etc.

•

To avoid the risk of lightning and electrical shock,

 

grounding is necessary. Follow item 14 of the

6Reinstall the cover.

“Important Safeguards” on page 5 when you install

the outdoor antenna (aerial).

Directional Iinkage

Do not use the same antenna (aerial) for both FM and TV (or VCR) reception, since the FM and TV (or VCR) signals can interfere with each other. If you must use a common FM/TV (or VCR) antenna (aerial), use a directional linkage type splitter.

Directional linkage type splitter

To DVD AV Controller To TV (or VCR)

39