Connections

■About the function

If you connect Onkyo Separate Collection Series components to the L-DR7, using the cables

and audio pin cables, you can use the following system functions. An cable is a special sys-

tem cable designed for use with Onkyo products. (An cable is not included in this package.)

The following Separate Collection Series components are commercially available:

•MD-101A .................. MiniDisc (MD) Recorder

•CDR-201A ................ Audio CD Recorder

Note that the available components may vary depending on the area.

Refer to pages 32–35 for more information on connecting the components to the L-DR7.

•Auto Power On

–When you turn on the power or start playing one of the components connected to the L-DR7, the PDR-155 turns on automatically. When you turn off the power to the PDR-155, all con- nected components will be turned off.

•Direct Change

When you press the Play button on an MD recorder or CD recorder, the PDR-155 automatically selects the component as the input source.

•Remote Control Operation

You can operate all system components using the supplied remote controller. (Refer to page 23 for more information.)

•Program Timer

You can program a timer on the PDR-155 so that playback or recording will start automatically on the specified component at the specified time. (Refer to pages 89–95 for more information.)

•CD Dubbing

You can perform CD dubbing on an MD recorder or CD recorder from the PDR-155 by pressing just one button. (Refer to the MD-101A or CDR-201A instruction manual for more information.) (The CD Dubbing function cannot be used for DVDs.)

•CD Dubbing of only selected tracks

You can program the PDR-155 so that only your favorite songs will be recorded on an MD recorder or CD recorder by pressing just one button. (Refer to the MD-101A or CDR-201A instruction manual and page 97 of this manual.)

•Just connecting an cable does not enable the system functions. Refer to pages 32–35 and connect the audio pin cables correctly.

•Refer to the instruction manuals for the connected devices for more information on system functions.

36