Basic
Using the Sleep Timer
With the sleep timer you can set the
AMP
TUNER
SLEEP
Press the REMOTE MODE [AMP] button, and then press the [SLEEP] button repeatedly to select the required sleep time.
You can set the sleep time from 90 to 10 minutes in 10 minute steps.
The SLEEP indicator appears on the display when the sleep timer has been set, as shown. The specified sleep time appears on the display for about five seconds, then the previous display reappears.
SLEEP indicator
DIGITAL AAC dts Neo:6 EX PRO LOGIC STEREO DSP FM STEREO AUTO
A.CTRL MUTING SLEEP
ORY | TIMER |
kHz | |
MHz | 1 2 3 4 |
If you need to cancel the sleep timer, press the [SLEEP] button repeatedly until the SLEEP indicator disappears.
To check the time remaining until the
Using Headphones
You can connect a pair of stereo headphones
Notes:
•Always turn down the volume before connecting your headphones.
•The speakers are turned off while the headphones plug is inserted in the PHONES jack.
•When you connect a pair of headphones, the listening mode is set to Stereo, unless it’s already set to Stereo or Direct. When you disconnect the headphones, the previous listening mode is resumed.
•When the DVD multichannel input is selected, only the front left and front right audio can be heard in the headphones.
35