Basic Setup
This chapter explains the basic settings you need to make to get the
Speaker Setup
Speaker Detection
The
3 |
| Press [ENTER]. |
|
| |
| ENTER | The connected speakers are detected |
|
| automatically, and the results appear on |
|
| the display, as shown. |
Y:Speaker connected.
N:No speaker connected.
Surround back speaker
Surround speakers
Center speaker
ENTER
TEST TONE
ON STANDBY
TV
I INPUT
1 |
| 2 | 3 | + |
|
|
|
| TV CH |
4 |
| 5 | 6 | - |
7 |
| 8 | 9 |
|
|
|
|
| TV VOL |
+10 |
| 0 | CLEAR |
|
|
|
| REMOTE | |
TONE |
|
|
| |
_ |
| MODE | ||
| + | AMP | ||
|
|
| ||
|
|
|
| TUNER |
DVD | V1 | V2 | DVD | |
INPUT SELECTOR |
| |||
TV | AUX | TUN | TV | |
DIMMER |
|
|
| SLEEP |
TV |
| U | MEN |
|
PMEN |
| |||
INPUT | TO |
| U |
|
+ |
|
|
|
|
CH |
| ENTER | VOL | |
DISC |
| |||
- | EXIT | GUIDE |
| |
|
| |||
PREV | R |
| TUP |
|
ET | URN |
| ||
CH |
| SE |
| |
DISPLAY |
|
|
| MUTING |
PLAY MODE | SP A | SP B | RANDOM | |
AUDIO | SUBTITLE | ANGLE | LAST M | |
DIRECT | STEREO | SURR | DSP | |
REPEAT | SEARCH | MEMORY | ||
TUN - | TUN + | TUN M | P MEM | |
|
|
| LEVEL | LEVEL |
TEST TONE | CH SEL | - | + | |
OPEN/CLOSE | VIDEO OFF |
|
| |
|
|
| L.NIGHT | CINE FLTR |
AMP
VOL
SETUP
Subwoofer
Notes:
•Always use two surround speakers (left and right).
•Only connect a surround back speaker if you’ve already connected two surround speakers. If no sur- round speakers are connected, the surround back speaker will not work.
•When this SP Detect function is used, the Speaker Configuration settings (pages
Speaker Level Calibration (Test Tone)
You can adjust the volume of each speaker so that all speakers can be heard equally at the listening position.
•The individual speaker levels cannot be adjusted while the
1 |
| Press the REMOTE MODE [AMP] |
AMP | button followed by the [SETUP] |
TUNER
button.
2 | Use the Up and Down [ ]/[ ] |
| buttons to select “0. SP Detect,” |
1 | AMP | Press the REMOTE MODE [AMP] | |
button followed by the [TEST | |||
| TUNER | ||
|
|
TONE] button.
The test tone is output by the front left speaker.
TEST TONE
2 | Turn up the volume so that you | |
can hear the test tone | ||
| ||
| sufficiently. | |
| While each speaker outputs the test |
ENTER
ENTER
and then press [ENTER].
“SP Detect?” appears on the display.
VOL |
tone, its name appears on the display, as |
shown. |
30