Advanced Setup—Continued
7
ENTER
ENTER
Use the Down [ ] button to select “Surr B,” and use the Left and Right [ ]/[ ] buttons to select:
Sml: Select if the surround back speaker is small.
Lrg: Select if the surround back speaker is large.
Non: Select if no surround back speaker is connected.
Notes:
•If the Surround setting in step 6 is set to Non, this setting does not appear.
•If the Surround setting in step 6 is set to Sml, the Lrg option cannot be selected.
3
ENTER
ENTER
Use the Down [ ] button to select “Xover,” and then use the Left and Right [ ]/[ ] buttons to select a crossover frequency.
Choose a crossover frequency suitable for your speaker system.
If you’re using a subwoofer, choose a crossover frequency based on the diam- eter of your front speakers.
If you’re not using a subwoofer, use the diameter of the first speaker that you specified as Sml in steps 4 through 7 in the “Speaker configuration” set- tings.
Speaker cone | Crossover |
diameter | frequency |
8 | Press the [SETUP] button. |
| |
| The setup menu closes. |
Notes:
•When the SP Detect function is used (page 30), these Speaker Configuration settings will change.
Crossover Frequency
To get the best bass performance from your speaker system, you need to set the crossover frequency according to the size and frequency response of your subwoofer and other speakers (front, center, and sur- round).
1 | AMP | Press the REMOTE MODE [AMP] |
TUNER | button followed by the [SETUP] | |
|
|
button.
2 | Use the Up and Down [ ]/[ ] |
| buttons to select “1. SP Config,” |
ENTER | and then press [ENTER]. |
Over 8 in. | 60Hz | |
(20 cm) | ||
| ||
|
| |
80Hz | ||
| ||
|
| |
100Hz (default) | ||
| ||
|
| |
120Hz | ||
| ||
|
| |
Under | 150Hz | |
(9 cm) | ||
|
4 | Press the [SETUP] button. |
| |
| The setup menu closes. |
Note:
•For a more accurate setting, look up the frequency response in the manuals supplied with your speakers and set accordingly. In addition, listen to some music that you know well and choose a higher crossover fre- quency if you think there’s not enough sound coming from the subwoofer; a lower setting if you think there’s too much.
ENTER
49