IBM S544-5351-03 manual Selecting a Sample Spooled File, Layout Options You can Set, None

vSelect Set page layout options to specify the page size, orientation, and margins, as described in ªInitial APU Setupº on page 14.

vSelect Define overlays to name the overlay that you want merged with the application data on the page.

vSelect Define page segments to include the company logo in the output.

vSelect Define field mapping to map spooled file data to the output page.

Most of these steps are illustrated below. You can perform the steps in any order, as long as you select a sample spooled file first.

Selecting a Sample Spooled File

Use the Select a sample spooled file option to specify the name of the spooled file that contains the output of the billing application.

Note: This action was performed previously in step 2a on page 39. This can be used to make changes to existing print definitions, rather than using the Define option.

Page Layout Options

To set page layout options, type 1 next to that option to display the panel that is shown in Figure 41. This panel enables you to define page layout options for the *ORIGINAL copy. These options include input drawer for this copy, page dimensions and options, and the use of a constant back overlay (back side overlay without application data).

			Set Page Layout Options
Print Definition . . .	SUNSD1	Page Format		:	*DEFAULT
Library	QAPU	Copy	. . . . . . . .	:	*ORIGINAL
Type choices, press Enter.
Input drawer	*DEFAULT		*DEFAULT, 1, 2, 3, 4
Default line increment	*PRTDEF	*INCH	*PRTDEF, *INPUT, Value
Default Column inc. . .	*PRTDEF	*INCH	*PRTDEF, *INPUT, Value
Page length	11	*INCH	*PRTDEF, *INPUT, Value
Page width	8.5	*INCH	*PRTDEF, *INPUT, Value
Top margin (down) . . .	0	*INCH	*PRTDEF, 0, Value
Left margin (across) .	0	*INCH	*PRTDEF, 0, Value
Page orientation . . .	0		*PRTDEF, *INPUT, 0, 90...
Duplex printing . . . .			1=Yes, 2=Tumble
Back overlay	*NONE		*NONE, Name	F4 for list
Position across . . .		*INCH	0, Value
Position down . . . .		*INCH	0, Value
F3=Exit F4=Prompt F12=Cancel		F22=Set Units

Figure 41. Set Page Layout Options panel

Page Layout Options You can Set

You can specify the following page layout options:

vThe input drawer from which the paper is to be drawn

vLine and column increments for this page, such as six lines per inch for each line and ten characters per inch for each column

vPage length and width

vPage margins and orientation; in this example, all zeroes

Setting up Duplexing

Notice that you can specify duplex printing.

42APU User's Guide