IBM S544-5351-03 manual Defining User Exit After, YES, *NO, Spoolfile, Devd

output queue where the input spooled file was found. *DEV has APU place the file into the output queue of the device specified in the Output Device field.

Defining User Exit After

This panel is used to specify what is to be done after processing a file.

	Define Action for Output Spooled File
Sequence . . . .	. . :	10
Text	. . :	QSYSPRT spool in OUTQ1
Action	. . :	1 / 1
Panel	. . :	2 / 2
Type choices, press Enter.
File	. . .	*SPOOLFILE	Name, *PRTDEF, *SPOOLFILE
User Data . . . .	. . .	*SPOOLFILE	User Data, *PRTDEF, *SPOOLFILE
Form Type . . . .	. . .	*SPOOLFILE	Form Type, *PRTDEF, *SPOOLFILE
Hold	. . .	*NO	*YES, *NO
Save	. . .	*NO	*YES, *NO, SPOOLFILE
Output bin . . .	. . .	*DEVD	1-65536, *DEVD, *SPOOLFILE
User exit after .	. . .	*NONE	Name, *NONE
Library . . . .	. . .		Name, *LIBL
User parameter	. . .		Value
			Bottom
F12=Cancel			F15=Next action

Figure 108. Define Action for Output Spooled File panel

File The File field is the name of the output spooled file. Use *PRTDEF if you want the output spooled file to have the same name as the print definition. Use *SPOOLFILE if you want the output spooled file to have the same name as the input spooled file.

User Data

The User Data field specifies the character string that is attached to the output file. *PRTDEF tells APU to set the value of this field to the name of the processed print definition. *SPOOLFILE tells APU to set this character string value to the data string of the input spooled file.

Form Type

The Form Type field names the form type of the output spooled file. *PRTDEF tells APU to set the form type to the name of the processed print definition. *SPOOLFILE sets the form type of the output file to the form of the input file.

Hold The Hold field holds a value specifying the status that the output spooled file is top have. *NO sets the value to READY; *YES sets the value to HELD.

Save The Save field specifies what happens to the output spooled file: *NO does not save the file; *YES saves the file. *SPOOLFILE does to the output spooled file what was done to the input spooled file.

Output Bin

The Output Bin field is the name of the output bin of the printer. *DEVD puts the file in the bin that is specified by the printer device description. *SPOOLFILE is used to specifiy the output bin of the input spooled file.

96APU User's Guide