IBM S544-5351-03 manual Sample, Prtdeflib, PRT01

	Define		Action for Output Spooled File
Sequence	:	10
Text	:	QSYSPRT spool in OUTQ1
Action	:	1	/ 1
Panel	:	1	/ 2

Type choices, press	Enter.
User exit before .	. .	*NONE	Name, *NONE
Library	. .		Name, *LIBL
User parameter .	. .		Value
Print Definition .	. .	SAMPLE	Name, *SPOOLFILE, *NONE
Library	. .	*PRTDEFLIB	Name, *PRTDEFLIB, *LIBL
Run option . . .	. .	*NORMAL	*NORMAL, *NOCOPY, *REPRINT
User exit middle .	. .	*NONE	Name, *NONE
Library	. .		Name, *LIBL
User parameter .	. .		Value
Output device . . .	. .	*JOB	Name, *JOB
Output queue . . .	. .	PRT01	Name, *DEV, *SPOOLFILE
Library	. .	*LIBL	Name, *LIBL
====>
F12=Cancel		F15=Next action

Figure 107. Define Action for Output Spooled File panel

On this panel, you specify the name, library, and user-defined parameter for the program that APU is to call before, during, or after processing. The default is *NONE. Refer to Appendix B, ªUser Exitsº on page 103 for details about the user exits.

The Print Definition lines contain values for the library where the print definition is stored, and for the ªRun Option.º

Following are the values that could be entered for Run Option:

Ignored

If you specify *NONE on the print definition field, any value you place here is ignored.

*NORMAL

This is the default entry. If only one action (of 16) is defined, *NORMAL is the only valid value for the field, so the value must be *NORMAL for the first (or only) action.

*NOCOPY

This value is valid only if specified for the second (or later) action group. It allows different print definitions for the same spooled file.

*REPRINT

This value is valid only if specified for the second (or later) action. This value is used if you want to apply the same print definition multiple times on the same spooled file.

In the output device field, you specify the name of the device on which the spooled file is to be printed. The value *JOB gets APU to place the output spooled file in the out-queue of the current device.

The output queue field contains the name of the output queue where the spooled file is to be placed. *SPOOLFILE tells APU to place the output file in the same

Chapter 6. Automatic Printing with APU Monitor 95