Onkyo TX-L55 Basic Operation-Continued, Presetting Radio Stations, Selecting Preset Stations

TX-L55_En.book Page 37 Tuesday, June 1, 2004 9:02 AM

Basic Operation—Continued

■ Manual Tuning Mode

1	Press the REMOTE MODE [AMP]
AMP	button, then press the [TUN]
TUNER	INPUT SELECTOR button to
	select FM.
TUN
2	Press the [TUN M] button repeat-
	edly until the AUTO indicator dis-
	appears from the display.
	Manual Tuning mode is now selected.
3	Use the [TUN–] and [TUN+] but-
	tons to tune into a radio station
TUN - TUN +	by frequency.
	Press and hold these buttons to change
	the frequency continually. Press once to
	change the frequency one step at a time.
	Check your local radio guide for the
	frequencies of the stations available in
	your area.

Notes:

•The American model changes FM frequency in 0.1 MHz steps.

•Other models change frequency in 0.05 MHz steps for FM.

•In Manual Tuning mode, FM stations will be in mono. Switch back to Auto Tuning mode for stereo.

Tuning into weak FM stations

If the signal from a stereo FM station is weak, it may be impossible to get good reception. In this case, switch to Manual Tuning mode and listen to the station in mono.

Using RDS (European model only)

When tuned into an RDS (Radio Data System) station that’s broadcasting PS (Program Service Name) infor- mation, the RDS indicator appears and the name of the station appears on the display. Only European models support RDS, and only in areas where RDS is used.

Presetting Radio Stations

You can store up to 30 radio stations as presets.

1		Tune into the station that you
		want to store as a preset.
2		Press the [P MEM] button.
	P MEM	The MEMORY indicator appears and
		the preset number flashes.
			MEMORY
3		While the MEMORY indicator is
		displayed, use the CH [+/–]

+button to select a preset from 1

DISC	through 30.
CH

- In this example, preset #3 is selected.

4	Press the [P MEM] button again
P MEM	to store the station.
	The station is stored and the preset
	number stops flashing.
	Repeat this procedure for all of your
	favorite radio stations.
Selecting Preset Stations
1	Press the REMOTE MODE [AMP]
AMP	button, then press the [TUN]
TUNER	INPUT SELECTOR button to

select FM.

TUN

2	Use the CH [+/–] button to select
	the presets.
	+
	CH
	DISC
	-

37