Onkyo TX-L55 Connecting AV Components-Continued, Connecting Your TV or Projector, Monitor Out

TX-L55_En.book Page 22 Tuesday, June 1, 2004 9:02 AM

Connecting AV Components—Continued

Connecting Your TV or Projector

Monitor Out

■Using Composite Video

Use a composite video cable to connect the TX-L55’s V MONITOR OUT to a composite video input on your TV, as shown.

MONITOR

OUT

V

TV, projector, VIDEO IN

etc.

■Using S-Video

Use an S-Video cable to connect the TX-L55’s

S MONITOR OUT to an S-Video input on your TV, as shown.

MONITOR

OUT

TV, projector,

Audio Connections

These connections will allow you to listen to audio from your TV via the TX-L55.

If your TV has no audio outputs, connect the TX-L55 to your VCR and use its tuner (see page 24).

Note:

•Initially, the OPT 1 digital input is assigned to the TV input source. If you connect to a different digital audio input or only to an analog input, you’ll need to assign it to the TV input source (see page 31).

■Using a Coaxial or Optical Connection

•Use an optical digital audio cable to connect the TX-L55’s OPT 1 DIGITAL INPUT to the optical output on your TV, as shown.

OR

•Use a coaxial digital audio cable to connect the TX-L55’s COAX DIGITAL INPUT to the coaxial output on your TV, as shown.

COAX

OPT1	Connect one
	or the other

etc.

S

TV, projector,

S VIDEO IN

	etc.
DIGITAL OUT	DIGITAL OUT
OPTICAL	COAXIAL

■ Using Component Video ■ Using Analog Connections

Use a component video cable to connect the TX-L55’s COMPONENT MONITOR OUT to a component video input on your TV, as shown.

If your TV doesn’t have digital audio outputs, or you want to record from it, you’ll need to make the following analog audio connections.

Use an analog audio cable to connect the TX-L55’s TV IN L/R inputs to the analog audio outputs on your TV, as shown.

TV, projector, etc.

IN

TV

Y PB PR

COMPONENT

		AUDIO
COMPONENT	TV, projector,	OUTPUT
VIDEO IN		L
Y PB PR	etc.
		R

22