Onkyo TX-NR1008 instruction manual Learning Commands, Message for transfer will appear

6 Press ENTER.

A message for transfer will appear.

8–2. Activities Setup My Movie

Now we are ready to transfer data to the remote.

Please hold the remote so that it is facing the receiver.

Use ENTER button of your remote to activate “OK”.

Ready?

OK

To use the remote controller, point it at the AV receiver’s remote control sensor, as shown below.

Remote control sensor (Transmitter)

Incoming sensor

15
15
15° off center	Approx.
	16ft. (5 m)
(Left/Right/Up/Down)
7 Press ENTER.

8–2. Activities Setup	My Movie
Wait...

When the transfer is successful, the following screen appears.

		8–2. Activities Setup	My Movie
		Successful
		Return
8	Press ENTER.
	The “Activities Setup” menu appears onscreen.
9	Press SETUP.
	The setup menu closes.

Learning Commands

The AV receiver’s remote controller can learn the com- mands of other remote controllers. By transmitting, for example, the Play command from your CD player’s remote controller, the remote controller can learn it, and then transmit the exact same command when its 1is pressed in the CD remote mode.

This is useful when you’ve entered the appropriate remote control code (➔ 86) but some buttons don’t work as expected.

ON

REMOTE

MODE

1 While holding down REMOTE MODE for the mode in which you want to use the command, press and hold down ON until REMOTE MODE button lights (about 3 seconds).

2 On the supplied remote controller, press the but- ton you want to learn the new command.

3 Point the remote controllers at each other, about 2 to 6 inches (5 to 15 cm) apart, and then press and hold the button whose command you want to learn until REMOTE MODE button flashes.

If the command is learned successfully, REMOTE MODE button flashes twice.

R

VOLUME

TESTTON

MUTING

EVEL

E

SEL

CH

PRESET

D

C

DVD

E

About 2 to 6

CH

TUNER

TAP

-INPUT

PHONO

GROUP

2-

SURMODE

NER

MULTI

OR

ER

SELECT TU

VIDEO

DC

DISC

inches (5 to 15 cm)

DIMM

INPUT TAPE

DVD

1-

VIDEO

SLEEP

POWER

Supplied remote controller

4 To learn more commands, repeat steps 2 and 3.

Press any REMOTE MODE when you’ve finished. REMOTE MODE button flashes twice.

En

90