Onkyo TX-NR1008 Picture Mode*1, Film Mode*2*4*5, Edge Enhancement*2*4, Noise Reduction*2*4*6

■Picture Mode*1

`Custom:

All settings can be performed manually.

`ISF Day:

Setting when a room is bright.

`ISF Night:

Setting when a room is dark.

`Cinema:

Selected when the picture source is movie film, etc.

`Game:

Selected when the picture source is game console.

`Through:

Default values are adapted for all settings.

With “Picture Mode”, you can change the following set- tings to be suitable for the movie or game screen by one operation; “Film Mode”, “Edge Enhancement”, “Noise Reduction”, “Resolution”, “Brightness”, “Contrast”,

“Hue”, “Saturation”, “Gamma”, “Red Brightness”, “Red Contrast”, “Green Brightness”, “Green Con- trast”, “Blue Brightness”, “Blue Contrast”.

The receiver has been designed to incorporate setup and calibration standards established by the Imaging Science Foundation (ISF). The ISF has developed carefully crafted, industry-recognized standards for optimal video performance and has implemented a training program for technicians and installers to use these standards to obtain optimal picture quality from the receiver. Accordingly, Onkyo recommends that setup and calibration be per- formed by an ISF Certified installation technician.

■Film Mode*2*4*5

`Video:

Does not process in either “3:2” or “2:2”.

`Auto:

Adjusts to the picture source, automatically selecting “Film Mode”.

`3:2:

Selected when the picture source is movie film, etc.

`2:2:

Selected when the picture source is computer graph- ics, animation, etc.

The AV receiver will adjust to the picture source, process- ing in either “3:2” or “2:2” (Film Mode). It automatically converts the source to the appropriate progressive signal and reproduces the natural quality of the original picture. When the “Film Mode” setting is set to “Auto”, the AV receiver automatically detects the picture source and in either “3:2” or “2:2”. However, there may be times when you will get a better picture by setting “Film Mode” your- self.

■Edge Enhancement*2*4

`0 to +10

With this setting you can adjust the sharpness of edges in the picture. “0” is the softest. “+10” is the sharpest.

■Noise Reduction*2*4*6

`Off:

Noise reduction off.

`Low:

Low noise reduction.

`Mid:

Medium noise reduction.

`High:

High noise reduction.

With this setting, you can reduce noise appearing on the screen.

■Resolution*2*4

`Through:

Select this to pass video through the AV receiver at the same resolution and with no conversion.

`Auto:

Select this to have the AV receiver automatically convert video at resolutions not supported by your TV. When the “Monitor Out” is set to “Analog”, this setting will be changed to “Through”.

`480p (480p/576p):

Select this for 480p or 576p output and video con- version as necessary.

`720p:

Select this for 720p output and video conversion as necessary.

`1080i:

Select this for 1080i output and video conversion as necessary.

`1080p:

Select this for 1080p output and video conversion as necessary. When the “Monitor Out” is set to “Ana- log”, this setting will be changed to “1080i”.

You can specify the output resolution for the HDMI out- puts and have the AV receiver upconvert the picture reso- lution as necessary to match the resolution supported by your TV.

Available only when “Source” has been selected in the “Resolution” of the “Monitor Out” setting (➔ 44).

■Brightness*1*2*4

`–50 to 0 to +50

With this setting you can adjust the picture bright- ness. “–50” is the darkest. “+50” is the brightest.

■Contrast*1*2*4

`–50 to 0 to +50

With this setting you can adjust contrast. “–50” is the least. “+50” is the greatest.

■Hue*1*2*4

`–20 to 0 to +20

With this setting you can adjust the red/green bal- ance. “–20” is the strongest green. “+20” is the strongest red.

■Saturation*1*2*4

`–50 to 0 to +50

With this setting you can adjust saturation. “–50” is the weakest color. “+50” is the strongest color.

En

55