Onkyo TX-NR1008 HDMI Input, Component Video Input, Bd/Dvd, Vcr/Dvr, Cbl/Sat, Game, Pc

HDMI Input

If you connect a video component to an HDMI input, you must assign that input to an input selector. For example, if you connect your Blu-ray Disc/DVD player to HDMI IN 2, you must assign “HDMI 2” to the “BD/DVD” input selector.

If you’ve connected your TV to the AV receiver with an HDMI cable, composite video, S-video and component video sources can be upconverted* and output by the HDMI output*1. You can set this for each input selector by selecting the “- - - - -” option.

Composite video, S-Video,
component video	HDMI
IN
OUT
Composite video, S-Video,	HDMI
component video

*1 This applies only when “Monitor Out” setting is set to other than “Analog” (➔ 43).

Here are the default assignments.

Input selector	Default assignment
BD/DVD	HDMI 1
VCR/DVR	HDMI 2
CBL/SAT	HDMI 3
GAME	HDMI 4
PC	HDMI 5
AUX	FRONT (Fixed)
TUNER	- - - - - (Fixed)
TV/CD	- - - - -
PHONO	- - - - -
PORT	- - - - -

■BD/DVD, VCR/DVR, CBL/SAT, GAME, PC,

TV/CD, PHONO, PORT

`HDMI 1, HDMI 2, HDMI 3, HDMI 4, HDMI 5, HDMI 6:

Select the HDMI IN to which the video component has been connected.

`- - - - -:

Output composite video, S-Video, and component video sources from the HDMI output. The video out- put signal from the HDMI output is the one config- ured in “Component Video Input” (➔ 45).

•“AUX” is used only for input from the front panel.

•Each HDMI input cannot be assigned to two input selec- tors or more. When HDMI 1 - HDMI 6 have already been assigned, you must set first any unused input selec- tors to “- - - - -” or you will be unable to assign HDMI 1 - HDMI 6 to input selector.

Note

•For composite video, S-Video, and component video upconver- sion for the HDMI output, the “Monitor Out” setting must be set to other than “Analog” (➔ 43), and the “HDMI Input” set- ting must be set to “- - - - -”. See “Video Connection Formats” for more information on video signal flow and upconversion (➔ 22).

•If no video component is connected to HDMI output (even if the HDMI input is assigned), the AV receiver selects the video source based on the setting of “Component Video Input”.

•When an HDMI IN is assigned to an input selector as explained here, the same HDMI IN will be set as a priority in the “Digital Audio Input” (➔ 46). In this case, if you want to use the coaxial or optical audio input, make the selection in the Audio Selector in the Home menu (➔ 27).

•“TUNER” selector cannot be assigned and is fixed at the “- - - - -” option.

•If you connect a component (such as UP-A1 Dock that seated iPod) to UNIVERSAL PORT jack, you cannot assign any input to “PORT” selector.

•Do not assign the component connected with the HDMI input to “TV/CD” selector when you set “TV Control” setting to “On” (➔ 59). Otherwise, appropriate CEC (Consumer Electronics Control) operation will not be guaranteed.

Component Video Input

If you connect a video component to a component video input, you must assign that input to an input selector. For example, if you connect your Blu-ray Disc/DVD player to COMPONENT VIDEO IN 2, you must assign “IN 2” to the “BD/DVD” input selector.

If you’ve connected your TV to the AV receiver with a component video cable, you can set the AV receiver so that composite video and S-Video sources are upcon- verted* and output by the COMPONENT VIDEO MONI- TOR OUT*1. You can set this for each input selector by selecting the “- - - - -” option.

Composite video, S-Video	Component video
IN
OUT
Composite video, S-Video	Component video

*1 This applies only when “Monitor Out” setting is set to “Ana- log” (➔ 43).

Here are the default assignments.

Input selector	Default assignment
BD/DVD	IN 1
VCR/DVR	- - - - -
CBL/SAT	IN 2
GAME	- - - - -
PC	- - - - -
AUX	- - - - -
TUNER	- - - - - (Fixed)
TV/CD	- - - - -
PHONO	- - - - -
PORT	- - - - -

En

45