Onkyo TX-NR1008 instruction manual Connecting a Recording Component, AV Recording

: Video signal

: Audio signal

Camcorder

If you select another input source during recording, that input source will be recorded.

Recording Separate AV Sources

Recording

This section explains how to record the selected input source to a component with recording capability, and how to record audio and video from different sources.

Connecting a Recording Component 3 On the source component, start playback.

			Here you can record audio and video from completely
			separate sources, allowing you to overdub audio onto your
			video recordings. This function takes advantage of the fact
			that when an audio-only input source (TV/CD, PHONO,
			etc.) is selected, the video input source remains
L	R		unchanged.
			In the following example, audio from the CD player con-
	AUDIO	VIDEO
	IN	IN	nected to the TV/CD IN and video from the camcorder
Cassette, CDR, MD,			connected to the AUX INPUT VIDEO jack are recorded
VCR, DVD recorder	etc.		by the VCR connected to the VCR/DVR OUT jacks.

Note

• The AV receiver must be turned on for recording. Recording is not possible while it’s in Standby mode.

•If you want to record directly from your TV or playback VCR to the recording VCR without going through the AV receiver, con-

nect the TV/VCR’s audio and video outputs directly to the recording VCR’s audio and video inputs. See the manuals sup- plied with your TV and VCR for details.

• Video signals connected to composite video inputs can be recorded only via composite video outputs. If your TV/VCR is connected to a composite video input, the recording VCR must be connected to a composite video output.

• The surround sound and DSP listening modes cannot be recorded.

•Copy-protected Blu-ray Disc/DVDs cannot be recorded.

•Sources connected to a digital input cannot be recorded. Only analog inputs can be recorded.

• DTS signals will be recorded as noise, so don’t attempt analog
recording of DTS CDs or LDs.
• While the listening mode is set to Pure Audio, no image is pro-
vided because the power is turned off for the video circuit. If you	CD player	VCR
want to make recordings, select other listening mode.

AV Recording

Audio sources can be recorded to a recorder (e.g., cassette
deck, CDR, MD) connected to the VCR/DVR OUT jacks.
		1		Prepare the camcorder and CD player for play-
Video sources can be recorded to a video recorder (e.g.,
VCR, DVD recorder) connected to the VCR/DVR OUT				back.
		2		Prepare the VCR for recording.
jack.
			3	Press AUX input selector.
1	Use the input selector buttons to select the source
	that you want to record.
		4		Press TV/CD input selector.
	You can watch the source while recording. The AV
	receiver’s MASTER VOLUME control has no effect			This selects the CD player as the audio source, but
				leaves the camcorder as the video source.
	on recording.
2				Start recording on the VCR and start playback on
	On your recorder, start recording.		5 the camcorder and CD player.
				The video from the camcorder and the audio from	En
				the CD player are recorded by the VCR.

35