Onkyo TX-NR1008 instruction manual Audio Connection Formats, “Monitor Out” setting set to “Analog”

■“Monitor Out” setting set to “Analog”

Video input signals flow through the AV receiver as shown, with composite video, S-Video and PC IN (Analog RGB) sources being upconverted for the component video output. Use this setting if you connect the AV receiver’s

COMPONENT VIDEO MONITOR OUT to your TV. Composite video is upconverted to S-Video and S-Video is downconverted to composite video. Note that these con- versions only apply to the MONITOR OUT V and S out- puts, not the VCR/DVR OUT V and S outputs.

The composite video, S-Video and component video out- puts pass through their respective input signals as they are.

This signal flow also applies when the “Resolution” set- ting is set to “Through” (➔ 44).

Video Signal Flow and the Resolution Setting When the “Monitor Out” setting is set to “Analog” (➔ 43), if the “Resolution” setting is set to anything other than “Through” (➔ 44), the video signal flow will be as shown here, with composite video and S-Video sources being upconverted for the component video output.

The composite video, S-Video and component video outputs pass through their respective analog input sig- nals as they are. HDMI input signals are not output.

Video Signal Flow Chart

Blu-ray Disc/DVD player, etc.

Composite S-Video	PC IN	Component HDMI
	(Analog RGB)

		IN
AV receiver
	MONITOR OUT
Composite	S-Video	Component	HDMI
		*1

TV, projector, etc.

*1 PC IN (Analog RGB) input signal is output at 720p resolution.

Video Signal Flow Chart

Blu-ray Disc/DVD player, etc.

Composite S-Video Component HDMI

IN

AV receiver

MONITOR OUT

Composite S-Video Component HDMI

TV, projector, etc.

Audio Connection Formats

Audio component can be connected by using any of the following audio connection formats: analog, analog multi- channel, optical, coaxial, or HDMI.

When choosing a connection format, bear in mind that the AV receiver does not convert digital input signals for ana- log line outputs and vice versa. For example, audio signals connected to an optical or coaxial digital input are not out- put by the analog VCR/DVR OUT.

If signals are present at more than one input, the inputs will be selected automatically in the following order of pri- ority: HDMI, digital, analog.

		Audio Signal Flow Chart
	Blu-ray Disc/DVD player, etc.
Analog	Multichannel		Optical		Coaxial	HDMI
	*1		IN
AV receiver		*1*3		*1	*1
	*3		OUT
Analog						HDMI
						*1	*2

TV, projector, etc.

*1 Depends on the “Audio TV Out” setting (➔ 58).

*2 This setting is available, when “Audio Return Channel” setting is set to “Auto” (➔ 59), you must select the TV/CD input selector and your TV must support ARC function.

*3 Only the front L/R channels are output.

En

23