Section Four

&Ln — Line Type

Parameters

0 or 1

Default0

Controls selection of leased line or dial-up line. Although the modem has only a single line connection, the power level is changed when setting leased line operation.

Examples

AT&L0

Dial-up line

AT&L1

Leased line

&Mn — Communication Mode

Parameters 0

DefaultNone

Same as &Q0.

&Pn — Dial Pulse Ratio (disabled for the U.S.)

Parameters

0,1, 2 or 3

Default0

Selects the ratio of the off hook (make) to an on-hook (break) interval used when pulse dialling.

Examples

AT&P0

39%/61% make/break ratio @ 10 pps

AT&P1

33%/67% make/break ratio @ 10 pps

AT&P2

33%/67% make/break ratio @ 20 pps

AT&P3

33%/67% make/break ratio @ 20 pps

&Qn — Communication Mode

Parameters

0, 4 through 6

Default

5

The modem supports three basic communication modes: asynchronous, autosync, and error correction.

4 - 22

Trumpcard 14400/28800 Modem

Page 54
Image 54
Ositech comm Trumpcard Data/Fax Modem manual Ln Line Type, Mn Communication Mode, Pn Dial Pulse Ratio disabled for the U.S