Modem Command Reference
S95 — Extended Result Codes
The bits in this register can be set to override some of the Wn command options. A bit set to a 1 in this register will enable the corresponding result code regardless of the Wn setting.
Bit 0 | CONNECT result code indicates DCE speed instead |
| of DTE speed |
Bit 1 | Append/ARQ to verbose CONNECT XXXX result |
| code if protocol is not NONE |
Bit 2 | Enable CARRIER XXXX result code |
Bit 3 | Enable PROTOCOL XXXX result code |
Bit 4 | Reserved |
Bit 5 | Enable COMPRESSION result code |
Bit 6 | Reserved |
Bit 7 | Reserved |
User’s Guide and Reference | 4 - 45 |