Palm 700wx manual Beaming a record, Press Finish right action key

4

U S I N G E M A I L A N D O T H E R W I R E L E S S S E R V I C E S

C H A P T E R

7Enter an alphanumeric passkey between 1 and 16 characters long, and

then press Next (right action key).

IMPORTANT Some Bluetooth devices have a built-in passkey; others let you choose the passkey. See the documentation for the Bluetooth device for more info.

8If the passkey is not built-in, enter the same passkey on the smartphone and the other Bluetooth device, and then

press Finish (right action key).

9If you’re connecting to a headset or hands-free car kit, check the Hands

Free box, and then press Finish (right action key).

10If you’re connecting to a GPS device,

press Finish (right action key), select the COM Ports tab, select the GPS device you selected in step 6, and then select New Outgoing Port. Press

Finish (right action key). After you set the partnership and COM port, you can configure the GPS settings (see the Using Your Palm® Treo™ 700wx user guide for more information). Be sure to

select the same port you have assigned for GPS here.

11 Press OK .

You can now communicate with this device whenever it is within range (about 30 feet) and your smartphone’s Bluetooth feature is turned on (see steps 2 and 3 earlier in this section).

DID YOU KNOW? If you’re using a hands-free Bluetooth device and it is within range, your smartphone routes all calls to the hands-free device instead of to your smartphone’s earpiece. Bluetooth range is up to 30 feet in optimum environmental conditions.

TIP Your smartphone supports only call audio with Bluetooth headsets. It does not support stereo music playback with Bluetooth headsets (enabled with Bluetooth A2DP profile).

Beaming a record

Your smartphone is equipped with an IR (infrared) port that lets you beam information to another device with an IR port. The IR port is located on the top of

70 B E A M I N G A R E C O R D