SETTING UP
CHARGING THE BATTERY
12
2
CHAPTER
desktop synchronization software.
Otherwise, you may lose information or
have difficulty with synchronization.
Support is not provided for mismatched
language setups.
NOTE If you insert the correct battery into
your smartphone and it still does not turn
on, you need to charge the battery. See
Charging the battery. If your smartphone
still does not turn on after being connected
to the AC charger for five minutes, do a soft
reset. See Performing a soft reset.
Charging the battery
The battery comes with enough of a charge
that you can complete the setup process
and activate your phone. After activation,
we recommend charging your smartphone
for three hours (or until the indicator light is
solid green) to give it a full charge. See
Maximizing battery life for tips on
maximizing the life of your smartphone
battery.
1Plug the AC charger into a wall outlet.
2Connect the charger cable to the
bottom of your smartphone. Make sure
the arrow on the connector is facing up,
toward the screen.
TIP
The power-saving feature turns off the
smartphone screen after a period of inactivity.
To wake up the screen, press and release
Power/End, and then press Center on the
5-way to turn off Keyguard.
TIP
To avoid draining the battery, charge your
smartphone every day, especially if you use
your phone often.
DID
YOU
KNOW
?
If your battery ever becomes
fully drained, your info is still stored safely on
your smartphone until you connect it to a
power source and charge the battery.
Gandalf_VZW_UG.book Page 12 Monday, February 25, 2008 10:50 PM