YOUR PHONE
WHAT CAN I DO WHEN I’M ON A CALL? 55
4
CHAPTER
3To end the conference, press Power/
End to end all the calls.
Using Flash mode during a call
Flash mode enables you to manually
manage your calls while one or more calls
are active. This mode is often used during a
conference call when one of the calls has
ended but the other remains connected.
1Press Send from Active Call View.
2If the Do you want to switch to Flash
mode prompt appears, select Yes.
3While in Flash mode, do any of the
following:
•If you have one call in progress and
you answer an incoming second call,
press Send to swap between the
calls.
•If you have one call in progress, to
make an outgoing second call, dial the
number using any of the methods
described in Making calls.
•If you have one call in progress and
you make an outgoing second call,
press Send after establishing a
connection with the second party to
set up a conference session using
three-way calling.
DID
YOU
KNOW
?
Pressing Send during a
conference call usually hangs up the second
call. However, depending on your network
connection, you may instead hang up the first
call.
Gandalf_VZW_UG.book Page 55 Monday, February 25, 2008 10:50 PM