Setting Menu Screens
SET UP CARD Screen
This page sets the loading, saving and formatting operations for setup cards. Align the “>” with the desired item and press the UP or DOWN button to perform the corresponding processing.
- SE T UP CARD -
¢READ ( ¢CAM ) |
| |
WR I T E | ( ¢CARD ) |
|
CARD | CONF I G . |
|
I D READ / WR I T E | : OF F | |
FUNCT I ON 1 ~ 2 R / W : ON | ||
L / M / H SE T R / W | : ON | |
L EVE L | 1 ~ 6 R / W | : ON |
Item | Variable | VF | Remarks | |
range | display | |||
|
| |||
|
|
|
| |
READ (>CAM) | USER | The setup card data is read out and | ||
|
| ENG | written to the unit. | |
|
|
|
| |
WRITE | USER | Camera data is written to the setup | ||
(>CARD) |
| ENG | card. | |
CARD CONFIG. | USER | The setup card is formatted. | ||
|
| ENG |
| |
|
|
|
| |
ID READ/WRITE | ON | USER | CAMERA ID READ/WRITE is switched | |
| OFF | ENG | ON or OFF when data is read from or | |
|
|
| written on the | |
|
|
| ON: Read/write is enabled. | |
|
|
| OFF: Read/write is disabled. | |
|
|
|
| |
FUNC1x2 R/W | ON | USER | READ/WRITE for FUNCTION1 and | |
| OFF | ENG | FUNCTION2 is switched ON or OFF | |
|
|
| when data is read from or written on | |
|
|
| the | |
|
|
| ON: Read/write is enabled. | |
|
|
| OFF: Read/write is disabled. | |
|
|
|
| |
L/M/H SET R/W | ON | USER | READ/WRITE for LOW SETTING, MID | |
| OFF | ENG | SETTING and HIGH SETTING is | |
|
|
| switched ON or OFF when data is read | |
|
|
| from or written on the | |
|
|
| ON: Read/write is enabled. | |
|
|
| OFF: Read/write is disabled. | |
|
|
|
| |
LEVEL 1x6 R/W | ON | USER | READ/WRITE for LEVEL 1/6, 2/6, 3/6, | |
| OFF | ENG | 4/6, 5/6 and 6/6 is switched ON or | |
|
|
| OFF when data is read from or written | |
|
|
| on the | |
|
|
| ON: Read/write is enabled. | |
|
|
| OFF: Read/write is disabled. | |
|
|
|
|
FFor example, so as not to change the CAMERA ID when reading from, or writing to the SET UP CARD, the ID READ/WRITE should be selected to OFF.
The underlined setting in the Variable range column indicates the preset mode.
Menu screen display methods
USER menu: Setting the MENU switch to SET displays the USER menu.
ENG menu: Holding down the SHIFT/ITEM and UP buttons simultaneously and setting the MENU switch to SET displays the ENG menu.
