Panasonic AJ-PD900WP Video OUT connector BNC, ¶ CAM OUT camera output connector BNC

µ￿

¶￿

´￿

³ECU REMOTE (remote control) connector (6-pin) Connect the AQ-EC1 extension control unit (option) here.

Note{

The POWER switches on unit and extension control unit must be set to OFF before the re- mote control cable is connected or disconnected.

´26-pin/12-pin output adaptor (option) (See page 98 for mounting method.)

The 26-pin/12-pin output adaptor AJ-YA900P (option) is mounted on this section. When the portable VTR is connected as the external VTR, recording can be performed simultaneously with the unit’s built-in VTR.

Furthermore, by connecting the SHAN-C12TCA multiconnector cable (optional accessory) to the 12-pin connector, it is possible to output the sound of audio channels 1 and 2 separately.

µVIDEO OUT connector (BNC)

This outputs the video signals (75° termination, rated level) to be monitored. During record- ing, EE images can be monitored; during playback, playback images can be monitored. While performing settings on the menu, the setting menu can be superimposed onto the shot images appearing on the monitor screen so that the settings can also be checked (in which case, the images appear in black and white).

¶CAM OUT (camera output) connector (BNC)

This outputs the composite video signals (75° termination, rated level). When a video moni- tor is connected, the images shot by the camera can be monitored. Even while the VTR is playing back, the camera’s images are output at all times.

– 17 –