Setup Card Operations
Writing set data to cards
1 Set the MENU SET/OFF switch to SET. The page on which the previous setting menu oper- ations were completed appears on the viewfinder screen. (When the menu is used for the first time, the first page appears.)
2 Press the MENU switch repeatedly until the SET UP CARD page shown below appears. (This operation can also be performed using the PAGEoUP/DOWN function.)
- SE T UP CARD -
¢READ ( ¢CAM ) |
| |
WR I T E | ( ¢CARD ) |
|
CARD | CONF I G . |
|
I D READ / WR I T E | : OF F | |
FUNCT I ON 1 ~ 2 R / W : ON | ||
L / M / H SE T R / W | : ON | |
L EVE L | 1 ~ 6 R / W | : ON |
3 Press the SHIFT/ITEM button repeatedly to move the cursor to the WRITE (¢CARD) po- sition.
4 A menu shown below appears when the UP (or DOWN) button is pressed.
- SE T UP CARD -
READ ( ¢CAM ) |
| |
¢WR I T E | ( ¢CARD ) |
|
CARD | CONF I G . |
|
I D READ / WR I T E | : OF F | |
FUNCT I ON 1 ~ 2 R / W : ON | ||
L / M / H SE T R / W | : ON | |
L EVE L | 1 ~ 6 R / W | : ON |
WR I T E ? ( Y : UP . N : DOWN )
5 Press the UP button to write data on the set up card.
When writing is complete, the message shown below appears.
- SE T UP CARD -
READ ( ¢CAM ) |
| ||
¢WR I T E | ( ¢CARD ) |
| |
CARD | CONF I G . |
| |
I D READ / WR I T E | : OF F | ||
FUNCT I ON 1 ~ 2 R / W : ON | |||
L / M / H SE T R / W | : ON | ||
L EVE L | 1 ~ 6 | R / W | : ON |
| WR I T E | OK |
|
6 When menu operations have been completed, return the MENU SET/OFF switch to OFF. The setting menu disappears from the viewfinder screen and the displays indicating the unit’s current status appear at the top and bottom of the viewfinder screen.
– 84 –
