Status Displays Inside the Viewfinder Screen
1 Extender display
This is displayed when the lens extender is being used.
2 Shutter speed/mode display
This displays the shutter speed or shutter mode setting.
OFF (1/60): Fixed at 1/60 (sec.)
1/100, 1/120, 1/250, 1/500, 1/1000:
Shutter speeds (seconds) during standard mode.
1/63.2–1/201.9 (SYNCHRO SCAN):
Synchro scan mode is selected.
3 Remaining tape length display
This indicates the remaining tape length (minutes) for the VTR during recording.
4
Remaining tape length display (25 Mpbs)
Display | Remaining tape | |
length | ||
| ||
|
| |
Full to 60 minutes | ||
|
| |
60 to 55 minutes | ||
|
| |
55 to 50 minutes | ||
|
| |
50 to 45 minutes | ||
|
| |
45 to 40 minutes | ||
|
| |
40 to 35 minutes | ||
|
| |
35 to 30 minutes | ||
|
| |
30 to 25 minutes | ||
|
| |
25 to 20 minutes | ||
|
| |
20 to 15 minutes | ||
|
| |
15 to 10 minutes | ||
|
| |
10 to 5 minutes | ||
|
| |
5 to 0 minutes | ||
|
|
Remaining battery level display
Remaining tape length display (50 Mbps)
Display | Remaining tape | |
length | ||
| ||
|
| |
Full to 30 minutes | ||
|
| |
30 to 25 minutes | ||
|
| |
25 to 20 minutes | ||
|
| |
20 to 15 minutes | ||
|
| |
15 to 10 minutes | ||
|
| |
10 to 5 minutes | ||
|
| |
5 to 0 minutes | ||
|
|
The
less than 3 minutes of tape remaining.
5
6
7
When an Anton Bauer Digital Magnum Series battery is used to supply power to the unit, the remaining battery level is displayed numerically (%).
Filter display
This displays the type of filter selected.
White balance memory display
This displays the selected white balance automatic adjustment memory.
A:The WHITE BAL switch is set to A.
B:The WHITE BAL switch is set to B.
P:The WHITE BAL switch is set to PRST.
Gain value display
This displays the image amplifier gain setting (dB) set by the GAIN switch.
Note{
When using an Anton Bauer Digital Magnum Series battery, the remaining battery level display continues to display the level for the Anton Bauer battery even if power supply is switched to an external power source near the end of the battery’s power. However, note that the unit operates according to the external power source.
– 54 –
