Panasonic AJ-PD900WP operating instructions 134, VTR Section, Accessories

Specifications

VTR Section

VTR Video System (during playback on a standard playback unit)

Bands:	Y; 30 Hz to 5.75 MHzo1.0 dB/p3.0 dB
	PB, PR; 30 Hz to 2.75 MHz o1.0 dB/p3.0 dB
S/N ratio:	Better than 55 dB
K factor (2T pulse):	Within 2%
Y/C delay:	Within 20 ns
VTR Audio System (during playback on a standard playback unit)
Sampling frequency:	48 kHz (synchronized to video)
Quantization:	16-bits/sample
Frequency response:	20 Hz to 20 kHzt1.0 dB (at the reference level on MIC
	LOWCUT OFF status of the Setting Menu)
Dynamic range:	85 dB or more (at 1 kHz, AWTD)
Distortion:	Within 0.1% (at 1 kHz, reference level)
Wow/flutter:	Below measurable limit
Head room:	20 dB
Emphasis:	T1r50 ¯s, T2r15 ¯s (can be turned ON/OFF)
VTR Tape Running System
Tape used:	DVCPRO format 1/4-inch M-size cassette tape
Tape speed:	67.640 mm/s (50 Mbps)
	33.820 mm/s (25 Mbps)
Recording/playback time:	Approx. 33 min. (50 Mbps, using the AJ-P66MP)
	Approx. 66 min. (25 Mbps, using the AJ-P66MP)
FF/REW time:	Approx. 3 min. (using the AJ-P66MP)
Connectors
Input
AUDIO IN CH1/CH2
(XLR·2, 3-pin, female):	MIC/LINE switchable, balanced, more than 10 kohm
	MIC; Menu setting to p60/p50/p40 dBu,
	LINE; Menu setting to p6/0/o4 dBu
MIC IN (XLR, 3-pin, female):	Phantom o48 V, p60 dB, balanced, 3 kohm
	Menu setting to p60/p50/p40 dBu
GENLOCK IN (BNC)	1.0 Vp-p, 75 ohm
TIME CODE IN (BNC):	0.5 to 18 Vp-p, high-impedance
Output
CAMERA OUT (BNC):	1.0 Vp-p, 75 ohm
VIDEO OUT (BNC):	1.0 Vp-p, 75 ohm
AUDIO OUT (CH1/CH2/MIX)
(XLR, 3-pin, male):	o4 dBu, balanced, low-impedance
	(CH1, CH2 or MIX selectable)
AUDIO CH1/CH2 OUT
(12-pin, multi connector)
(option):	p20 dBu, unbalanced, low-impedance
TIME CODE OUT (BNC):	1.5 Vp-p, low-impedance
PHONES (mini-jack·2):
Other
DC IN (XLR, 4-pin, male):	DC 11–17 V
DC OUT (4-pin):	DC 11–17 V, maximum rated current; 0.1 A
LENS (12-pin):
REMOTE (ECU, 6-pin):

Accessories

Shoulder belt (1)

Sony battery connector (screws included)

Weight and dimensions shown are approximate.

Specifications are subject to change without notice.

– 134 –