Maintenance
Condensation
If the unit is moved from a cold location to a warm location or used in areas with high humidity, the moisture in the air may adhere as water droplets on the head drum. This is called condensa- tion, and if the tape is run under these conditions, it will easily stick to the drum. Therefore, the following points should be observed.
ÁIf the unit is moved under conditions where condensation may occur, eject the tape.
ÁBefore inserting the tape, set the POWER switch to ON and check that the HUMID display in the display window is not lighted. If the HUMID display is lighted, do not insert the tape until the display goes off.
The HUMID display
is not lighted.
Cleaning the Video Heads
Use the
Cleaning the Viewfinder
ÁDo not use thinner or other solvents to remove dirt from the viewfinder. ÁWipe the lens with lens cleaner available on the market.
ÁAbsolutely do not wipe the mirror. If dirt, etc. has adhered to the mirror, remove it using a air blower available on the market.
Characteristic Phenomenon of CCD Cameras
Smear
Smear occurs when shooting