Power Supply
Using a Sony Battery Pack
1 Remove the battery mounts. See page 24.
2 Mount the accessory battery mounting connector.
3 Mount the Sony battery holder.
Mount the battery case with the cover detached first, and then mount the detached cover as shown in the figure.
ATighten the mounting screws.
BTighten the power supply contact screws.
CInsert the top of the detached cover in the direction of the arrow.
DAlign the hole at the bottom (metal part) of the cover with the hole at the bottom of the case and mount the cover to the battery mounting connector with the screw of the bat- tery holder.
A
C
D
B
Note{
Take care when attaching the battery holder that the wires are not pinched.
– 26 –
