Panasonic AJ-PD900WP 113, MID Setting Screen, This page sets the middle level

MID SETTING Screen

This page sets the middle level.

- M I D SE T T I NG ( 1 6 E 9 / P ) -

MAS T ER	GA I N	: 9 d B
¢￿
H . DT L L EVE L		: 1 2
V . DT L	L EVE L	: 1 4
DT L COR I NG		: 0 4
H . DT L	FREQ .	: 0 4
V . DT L	FREQ .	: P
DARK DT L		: 0 0
L EVE L DEPEND		: 0 3
MAS T ER	GAMMA	: 0 . 4 5
B L ACK S TRE TCH : OF F
MA TR I X	T AB L E	: A

(What appears inside the parentheses at the top right indicates the camera mode.)

This menu enables the 4 modes (16E9/P, 4E3/P, 16E9/I and 4E3/I) of the camera to be set separately. (However, the MASTER GAIN and MASTER GAMMA settings are common to all the modes.)

Note{

DARK DTL and LEVEL DEPEND function in a mutually opposite way: LEVEL DEPEND is automatically set to 0 when DARK DTL is set to a value other than 0; and DARK DTL is automatically set to 0 when LEV- EL DEPEND is set to a value other than 0.

The underlined setting in the Vari- able range column indicates the preset mode.

Menu screen display methods

USER menu: Setting the MENU switch to SET displays the USER menu.

ENG menu: Holding down the SHIFT/ITEM and UP buttons simul- taneously and setting the MENU switch to SET displays the ENG menu.

Item	Variable	VF			Remarks
	range	display
MASTER GAIN	p.3 dB	ENG	Gains of p3, 0, 3, 6, 9, 12, 15, 18, 21,
	.		24 and 30 dB can be set.
	.
	9.dB
	.
	.
	30 dB
H.DTL LEVEL	0.	ENG	H.DTL (detail) level setting
	.
	.
	12
	.
	.
	.
	31
V.DTL LEVEL	0.	ENG	V.DTL (detail) level setting
	.
	.
	14
	.
	.
	.
	31
DTL CORING	0.	ENG	DTL coring setting
	.
	.
	4.
	.
	.
	15
H.DTL FREQ.	1	ENG	H.DTL frequency selection
	.
	.		1:	2.5 MHz	4:	4 MHz
	.
	4		2:	3 MHz	5:	4.5 MHz
	.
	.		3:	3.5 MHz
	.
	5
V.DTL FREQ.	P	ENG	V.DTL frequency selection
	PIMIX		P: The frequency is suited to the
	I		progressive mode.
			PIMIX: The progressive and interlace
			frequencies are mixed.
			I: The frequency is suited to the
			interlace mode.
DARK DTL	0–5	ENG	Dark detail setting
			It boosts the detail of the black areas.
LEVEL DEPEND.	0	ENG	LEVEL DEPEND. setting
	.
	.		It eliminates the detail only in the dark
	.
	3		areas when the Y detail is boosted.
	.
	.		The higher the number selected, the
	.
	5		wider the range across which the detail
			is eliminated.
MASTER	0.35	ENG	Master gamma setting 0.01 steps
	.
GAMMA	.
	.
	0.45
	.
	.
	.
	0.75
BLACK	ON	ENG	ON/OFF switching for mode which
STRETCH	OFF		compensates low-illumination
			black-out
MATRIX TABLE	A	ENG	Color compensation table selection
	B

– 113 –