Panasonic AJ-PD900WP operating instructions 110, Function 4/5 Screen

Setting Menu Screens

FUNCTION 4/5 Screen

This page performs the adjustment function 4 settings.

-	FUNCT I ON 4				/ 5 -
FRONT		POWER			: ON
¢￿
FRONT		M I C			: - 4 0 d B
REAR		M I C	CH 1		: - 6 0 d B
REAR		M I C	CH 2		: - 6 0 d B
L I NE		CH 1 / CH 2			: + 4 d B
REAR		AUD I O			: S T EREO
M I C	LOWCUT			CH 1	: ON
M I C	LOWCUT			CH 2	: ON
EMPHAS I S					: OF F
L I M I T ER					: OF F
T ES T		TONE			: NORMA L

Item	Variable	VF	Remarks
	range	display
FRONT POWER	ON	ENG	ON: The phantom power is supplied
	OFF		to the front microphone.
			OFF: The phantom power is not
			supplied to the front microphone.
FRONT MIC	p40/	ENG	Camera microphone input level
	p50/		selection
	p60 dB
REAR MIC CH1	p40/	ENG	Rear jack AUDIO CH1 input
	p50/		microphone level selection
	p60 dB
REAR MIC CH2	p40/	ENG	Rear jack AUDIO CH2 input
	p50/		microphone level selection
	p60 dB
LINE CH1/CH2	o4/0/	ENG	Rear jack AUDIO CH1/CH2 input line
	p6 dB		input level selection
REAR AUDIO	STEREO	ENG	Audio CH1/CH2 rear jack input
	MONO		selection
			STEREO: Selects stereo input (CH1
			input is recorded in CH1 and CH2
			input is recorded in CH2.)
			MONO: Selects monaural input (The
			signals of CH1 and CH2 are mixed
			and recorded in CH1 and CH2
			respectively.)
MIC LOWCUT	ON	ENG	CH1 INPUT high-pass filter ON/OFF
CH1	OFF		switching
MIC LOWCUT	ON	ENG	CH2 INPUT high-pass filter ON/OFF
CH2	OFF		switching
EMPHASIS	ON	ENG	Emphasis ON/OFF switching during
	OFF		recording. The EE output signals are
			also linked with the setting of this
			switch.
LIMITER	ON	ENG	Audio limiter ON/OFF switching
	OFF		ON: The limiter functions.
			OFF: The limiter does not function.
TEST TONE	NORMAL	ENG	NORMAL: The TEST TONE signal is
	ALL		output when the CAM/BAR switch is
			set to BAR and the AUDIO IN switch
			CH1 is set to FRONT.
			ALL: The TEST TONE signal is
			output when the CAM/BAR switch is
			set to BAR.

Notes{

ÁThe frequency response for MIC LOWCUT ON are 200 Hz to 10 kHz.

ÁLIMITER initiates the limiter operation at a level equivalent to 3 dB below the peak (o18 dB).

ÁAUDIO SELECT initiates the limiter operation at the MAN setting and the AGC op- eration at the AUTO setting.

The underlined setting in the Variable range column indicates the preset mode.

Menu screen display methods

USER menu: Setting the MENU switch to SET displays the USER menu.

ENG menu: Holding down the SHIFT/ITEM and UP buttons simultaneously and setting the MENU switch to SET displays the ENG menu.

– 110 –