117
Troubleshooting (Advanced)
A peripheral device does not work. Install the driver.
Contact the manufacturer of the device.
When operation resumes from sleep*5 or hibernation, devices s uch as a
mouse, modem and cards may not function properly. In this case, restart the
computer or reinitialize the device.
When is displayed in the D evice Manager, remove and insert the device. If
the problem persists, restart the computer.
When you set [USB Port] to [Disabled] in the [Advanced] menu of the Setup
Utility (page 95), USB ports of port repli cator are also disabled.
The computer may not recognize the connection/removal of some devices, or
may not operate normally with some devices.
A
Click (Start) - [Computer] - [System properties] - [Device Manager].
A standard user needs to enter an administrator password.
Click [start] - [Control Panel] - [Performance and Maintenance] - [System] -
[Hardware] - [Device Manager].
BSelect the applied device, and remove the check mark for [Allow the
computer to turn off this device to save power] in [Power Manag ement].
(This item may be unavailable for some types of device s.)
In the case that a USB device does not work, remove the U SB device and con-
nect it again or connect the USB device to another po rt.
The connected mouse does not work. Check the mouse connecti on.
Install the driver compatible with the connected mouse.
If the mouse does not work even after installing the driver, set [Touch Pad] to
[Disabled] in the [Main] menu of the Setup Utility (page 90).
USB floppy disk drive does not work
as a boot drive.
You can use only the Panasonic CF-VFDU03U USB floppy disk drive (optional).
Connect the floppy disk drive directly to a USB port of the computer. Do not
connect it via a USB hub or USB connector of the port replicator or the car
mounter. If you have connected to a USB port on the computer, try connecting it
to one of the other USB ports.
Set [USB Port] and [Legacy USB Support] to [Enabled] in the [Advanced] menu
of the Setup Utility (page 95).
Set [Boot Option #1] to [USB Floppy Disk] in the [Boot] menu of the Setup Utility
(page 96).
Turn off the computer and connect the USB floppy disk drive, and then restart
the computer.
Connecting Peripherals