25
Battery Power
Battery indicator:
*1 In high temperature mode, the 100% battery level is equivalent to 80% level of the normal temperature mode.
NOTE
Once the battery is fully charged, the computer performs rec harging only when the battery level becomes less than
approximately 95%, so overcharging is avoided.
When [LED] is set to [OFF] on the [Concealed Mode Configura tion] menu, LED disappears (page 92).

Battery Indicator

Battery indicator Battery status
Not lit The battery pack is not inserted or not being charged.
Orange Charging is in progress.
Green The battery is fully-charged.
Blinking green In high temperature mode, the batt ery pack is discharging the power to 80%*1 of normal
temperature mode (page 26). Do not remove the battery pack in this status.
Red The remaining battery is approximately 9% or less.
Blinking red The battery pack or the charging circuit is not operating properly.
Blinking orange The battery cannot be charged temporarily due to the following r easons:
• Its internal temperature is out of the acceptable range.
• The power supply is not enough because software applications or p eripheral
devices are consuming a large amount of power.
Blinking green and
orange alternately
The temperature is low and the computer is warming up to prevent the hard disk drive
from malfunctioning. The computer will start automatically after warmin g-up.
Blinking orange slowly
When you set [Battery Charging Indicator] to [Flashing] on the [Main Menu] of [Setup Utility].