45
RAM Module
4Insert/Remove the RAM module.
To i nse rt
ATilt the module slightly and insert it in the slot.
BAlign the cutout (C) with the projection, and press down the module
so that the right and left hooks (D) are locked.
To r emo ve
ACarefully open the right and left hooks (D).
The module will rise.
BCarefully remove the module from the slot.
5Set the cover and battery pack.
CAUTION
Set the cover and battery pack correctly so that they do not fal l when you carry the computer.
NOTE
If it is hard to insert or to press down the RAM module, do not try forcibly but chec k the module’s direction.
Use the appropriate screw driver so as not to strip the thread of scre w.
If the RAM module is recognized correctly, the total size of the RAM module memory is displayed on the [Information]
menu of the Setup Utility (page 89).
If the RAM module is not recognized, power off the computer and ins ert it again.