72
LAN
NOTE
With this function enabled, power is consumed even if the com puter is in sleep*1, hibernation, or powered off. Be sure
to use the AC adaptor.
Even when a password is set in the Setup Utility and [Password On B oot] or [Password On Resume] is set to
[Enabled], entering the password is unnecessary for turning on or resuming the computer.
Connect the AC adaptor.
The Power On by LAN function is off under the following conditions :
When you turn the computer off by sliding the power switch for 4 seconds or longer (e.g., after a hung-up).
When you reattach the AC adaptor and battery pack to the computer after remov ing them.
The screen remains dark when the computer resumes from sleep*1. The previous screen display will be restored when
you touch the keyboard, touch pad or touchscreen (only for model with touchscreen).
*1 Windows XP: standby

Enabling the Power On by LAN function

The computer automatically turns from off to on when the computer is ac cessed from the network server via the internal LAN
port.
1
Select [Allow] in [Power On by LAN] in the [Advanced] menu of the Setup Utility (
page 93).
2In [Caution], press
Enter
.
3Press
F10
, and then select [Yes] and press
Enter
.
4Log on to Windows as an administrator.

5

Click (Start) - [Computer] - [System properties] - [Device Manager], and double-click
[Network adapters] - [Intel(R) 82577LM Gigabit Network Connection], and then click
[Advanced].
Power On by LAN/Wake Up from Wired LAN