77
Disabling/Enabling Wireless Communication
To change the function of the wireless switch
In the default setting, the wireless switch enables devic es that you select turning the wireless switch off last time. You can
change this function.
[Selects the device for which to turn the device status on each time with the dial og box.]
Display a dialog each time you set the wireless swit ch to ON so you can choose which wireless device to enable.
[Turns on the following device.]
Only selected devices are enabled when you set t he wireless switch to ON.
[Turns on the device that was on immediately before the wireless switch was turned off th e last time.]
(default)
When you turn on the wireless switch, the on/off settings that were selected when you last turned off the wireless
switch will be restored.
1Click on the notification area and click the Wireless Switch Utility icon ( or ).
2Click [Settings].
3Select the setting you want to assign to the wireless switch.
4Click [OK].
You can automatically disable the wireless LAN/wireless WAN connection when a LAN cable is connected to your c omputer.
You need to install the Wireless Connection Disable Utility to use this function.
Installing the utility
1Log on to Windows as an administrator.
2
Click (Start) and input [c:\util\wdisable\setup.exe] in [Search programs and files], and
press
Enter
.
Click [start] - [Run] and input “c:\util\wdisable\setup.exe”, and click [OK].
3Follow the on-screen instructions to install the Wireless Connection Disable Utility.
Wireless Connection Disable Utility