Security Measures

Setting the Supervisor Password

(enabling, changing, disabling)

1 Run the Setup Utility ( page 36)

2 Using and , select [Supervisor Setup] then press

3 Using and , select [Supervisor Password] then press

4 To enable or change your supervisor password

Enter your password at the [Enter Supervisor Password], then press .

CAUTION

Your password will not be displayed on the screen.

Please limit your password to seven characters. Note that there is no dis- tinction between upper and lower case letters.

White colored keys can be used. Note that space bar and function keys cannot be used.

Do not input your password while holding down on the or . Use only the upper horizontal row of numeric keys to input user pass- words. The numeric keys combined with alphabet keys on the lower key- board cannot be used.

Do not forget your password. If a password is forgotten you will be un- able to use your computer.

To disable your supervisor password

Using and , select [Delete Supervisor Password] then press . Go to step 7.

5 Re-enter your password at the [Enter Supervisor Password Again]

(This is for confirmation purposes.)

NOTE

When you do not want the User Password enabled, changed, or disabled without permission,

use and to select [User Password Protection], then set [Enable] with

.

6

7

Using and , select [Set Supervisor Password] then press

At the confirmation screen, press

8 Press to end the password setting procedure

9 Close the Setup Utility ( page 36)

20

Page 20
Image 20
Panasonic CF-35 Setting the Supervisor Password, To disable your supervisor password, Enabling, changing, disabling