Starting Up/Shutting Down
Starting Up
Latch
1 Open up the display
Slide the latch as shown and lift open the display.
NOTE
Do not turn on the computer with the LCD panel closed if an external monitor is not connected. The computer will not power on.
2 Turn your computer on
Move the power switch toward the rear direction and hold one second until the power indicator ( 
) goes on before releasing it.
CAUTION
Do not slide the power switch repeatedly.
After you have turned your computer off, you must wait ten seconds before you can turn it back on.
If the computer does not turn on when the power is switched on, the temperature of the CPU has exceeded its normal operating temperature. In this case, a function designed to prevent it from overheating is triggered automatically and prevents the computer from turning on. Should this happen, allow the computer to cool down then switch the power on again.
If the computer still does not turn on, please consult your nearest Panasonic dealer.
If 
is displayed,
you must first enter your User Password (
page 17).
Upon entering your
User Password and
pressing | . |
| If the correct password is input, |
Will Start
Over three incorrect attempts,
Will Not Start*
(Power off)
*If you are starting from the suspend mode (
page 10), if after three attempts the correct password is not input, or if no password is entered for about a minute, the computer returns to the suspend mode.
NOTE
If the display on the right appears,
the network password has been set. To read and write data to other computers, the correct password must be entered.
When an application or file that was previously displayed ap- pears on your screen,
this means the suspend or hibernation mode ( 
page 10) has been set.
3 Select your application
You are able to start working on your computer.
9
