Add-ons/Peripherals, Adding Memory | Panasonic CF-35 guide

Add-ons/Peripherals

Adding Memory

CAUTION

RAM module specifications

144 pins, 60/70 ns, 3.3 V,

SO-DIMM, EDO

RAM modules are extremely sensitive to static electricity. There are cases where static electricity generated by the human body has adversely affected such modules. In addi- tion, it is easy to damage the RAM modules or internal components of the computer. Therefore, when installing or removing a RAM module, handle the module with extreme care.

Installing/Removing the RAM Module

1 Power off your computer ( page 10)

Do not shut down using the suspend or hibernation mode.

CAUTION

Do not install or remove peripherals while your computer is in the suspend or hibernation mode; abnormal operation may result.

3

2

1

2 Remove the memory cover after removing the screw holding

1	it in place

Turn your computer over and use a screwdriver to remove the screw.

CAUTION

Do not touch the terminals or internal components, insert objects other than the module, or allow foreign particles to enter. Doing so has been known to cause damage, fire or electric shock.

3 Installing the RAM module

RAM Module Slot

2

1 Slide the module in at an angle.

2Snap the module into place by pushing it down.

1

Removing the RAM module

1Open the left and right hooks.

2

Hooks	2	Gently remove the RAM module from the slot.
Hooks

1

2

4

3

5

Put the cover back into place, then fasten the screw

Turn your computer on

24

Image 24

Panasonic CF-35 Add-ons/Peripherals, Adding Memory, Installing/Removing the RAM Module, Installing the RAM module

Contents

Operating Instructions Customers Record IntroductionIllustrations in this Manual Copyright Lithium Battery How to replace the fuseFor U.S.A For U.K Precautions For GermanyFor France Read Me First Saving Data on the Hard DiskSaving Data on Floppy Disks Computer Viruses First-time Operation Confirm the inclusion of all partsDummy FDD Operating Instructions Windows 95 System Pack Connect your computer to a power outlet Read the Limited USE Licence AgreementHandling the AC adapter Clamps First-time Operation Starting Up/Shutting Down Starting Up Using the Touch Pad Shutting Down power off your computerStarting Up/Shutting Down Starting Up Your Computer Quickly Using the suspend function Using the hibernation functionShutting Down Resuming Operation Conserving Power Setting the hibernation timeoutComputing On the Road Things to Remember Setting Power Management Power Management settings Battery Status Use the Battery Indicator to Check on the Battery StatusWhen the Remaining Battery Charge Becomes Low Computing On the Road Using the Battery Pack Using the Battery Pack Replacing the Battery Pack When the User Password is set Run the Setup UtilityTo disable your password Re-enter your password at the Enter User Password Again Setting the Coffee break Password enabling or disabling When the coffee break password is setTo disable the Coffee break Password Security Measures Procedure When the supervisor password is setPreventing the use of a floppy disk May be Opened Setting the Supervisor Password To disable your supervisor passwordEnabling, changing, disabling Infrared Data Communications Preparations for Infrared Data CommunicationsRunning TranXitTM Using a CD-ROM Drive Installing/Removing the UnitInstalling the unit Add-ons/Peripherals Using PC Cards Installing/Removing the PC CardInstalling the PC Card Type I or Installing/Removing the RAM Module Installing the RAM moduleAdd-ons/Peripherals Adding Memory Connecting a Port Replicator Using an External DisplayUsing a Printer Installing/Removing the hard disk Usage, Carrying and Maintenance When flyingMaintenance Usage Environment List of Error Codes Using the Self-diagnosis ProgramAt the MS-DOS prompt A\WINDOWS\COMMAND, input the following Computer Diagnosis Dealing with Problems Battery IndicatorStarting Up Dealing with Problems DisplayDisk Operations Character Input Setup Utility Connecting Peripherals Reinstalling Software Before ReinstallationReinstalling Preparation System setup Power ManagementDevice Manager Video driver Reinstalling Software Installing TranXitInstalling PhoenixCard Manager95 Installing Internet Explorer Windows 95 Setup Procedure If you want to complete the printer settings, pressEnter your name and your company’s name, then press If not, press Setup Utility Running the Setup UtilityClosing the Program Key Operations User Password Specifications Main SpecificationsOther Specifications Names and Functions of Parts Limited USE License Agreement Lizenz Laufzeit der Lizenz Contrat de licence dusage limité LicenceTermes, clauses et conditions LED indicators Index DFQX2535YA