Panasonic CF-W2 Series XP specifications Dealing with Problems Summary, ‹Display

Dealing with Problems (Summary)

Troubleshooting

‹Display

No display after powering on	z When the external display is not visible
	• Check your cable connection to the external display
	• Confirm that your display is powered on
	• Check the settings for your external display
	z The display destination may be set to the external display.
	Try changing the display destination by pressing the Fn+					F3	key.
	If you want to switch the display destination repeatedly by pressing the							Fn	+
	F3 key, make sure that the display destination has switched completely
	each time before pressing the Fn+F3 key again.
	z Press the Fn+F2 key and adjust the brightness.
The power has not been turned off,	z Has the computer been set to the power-saving mode?
but after a certain period of time,	To resume operation of your computer when the display’s power is off (for
there is no display	energy conservation purposes), press any key unrelated to the direct trig-
	gering of a selection, like the Ctrl key.
	z To save power, your computer may have automatically entered the standby
	mode (the power indicator blinks green) or hibernation mode (the power
	indicator turns off). If so, slide the power switch.
When the battery pack is used, the	z Press the		+		key and adjust the brightness. Note, however, that when
		Fn		F2
screen is darker than when the AC	the brightness is increased, the battery running time will become shorter.
adaptor is connected	Brightness can be set to separate levels for when the AC adaptor is con-
	nected and when it is disconnected.
An afterimage appears (e.g., the key	z If an image is displayed for a prolonged period of time, an afterimage may
green, red, and blue dots remain on	appear. This is not a malfunction. The afterimage will disappear when a
the display) or there are dots not dis-	different screen is displayed.
playing the correct colors	z High-precision and advanced technologies are used in the production of
	color liquid crystal displays (color LCDs). Therefore, if 0.002% or less of the
	picture’s elements either fail to light or remain constantly lit (that means that
	more than 99.998% of the elements are functioning properly), this is not
	considered a defect.
The screen becomes disordered	z The screen display may become distorted if the resolution or number of col-
	ors is changed, or if an external display is connected or disconnected while
	the computer is operating. Restart the computer.
The external display no longer	z When an external display, not compatible with the power-saving mode, is
shows the correct image	connected to the computer. The display may not function correctly when the
	computer enters the power-saving mode. Turn off the power to the external
	display.
When you want to display the fonts	z Change the size of the icons, etc. using "Icon Enlarger (Î "Chapter 6: Icon
or icons in a larger size	Enlarger" in onscreen Reference Manual).
	z You can also change the settings as follows (for more details, refer to the
	Windows Help).
	A Click [start] - [Control Panel] - [Appearance and Themes] - [Dis-
	play] - [Appearance].
	B Select the font size in [Font size] and click [Effects]. Then add the
	check mark for [Use large icons] to increase the icon size.
	C Click [OK], then click [OK].
	z To enlarge a part of the screen, use "Loupe Utility" (Î "Chapter 6: Loupe
	Utility" in onscreen Reference Manual).

50