Hard Disk Data Erase Utility
Important Information
The computer will restart.
Press the F2 key while [Panasonic] boot screen is displayed. The Setup Utility will start up.
Set the Product Recovery
DPress the F10 key.
At the confirmation message, select [Yes] and press the Enter key. The Setup Utility will close, and the computer will restart.
If [Enter Password] is displayed during the following procedure, enter the Supervisor Password or User Password.
EWhen the message "Select a number" is displayed, press the 2 key and
perform [2. [Erase HDD]].
(You can cancel this operation by pressing the 0 key.) The confirmation message will be displayed.
FPress the Y key.
Hard Disk Data Erase Utility will start.
(All of the screens below are only examples.)
GWhen [<<<Start menu>>>] is displayed, press the Enter key.
HThe approximate time required for erasing data will be displayed. Press the Space key.
IAt the confirmation message, press the Enter key.
The operation of erasing the hard disk starts.
zIf necessary, the “hard disk data erase” operation can be cancelled after it has begun by pressing the Ctrl+C key.
If the operation is cancelled before being completed, a part of data will not be erased.
70
