Panasonic CF-W2 Series XP specifications Hard Disk Backup Function

Hard Disk Backup Function

FAt the confirmation message, press the Y key.

GSelect how to divide the hard disk from the menu.

<To create a backup area and enable the backup function without dividing the hard disk>

Select [1].

<To create a backup area and divide hard disk into two partitions, for OS

and data>

Select [2], enter the partition size (GB), and press the Enter key.

•You can cancel this operation by pressing the 0 key.

•The data partition size will be the maximum settable size less the number entered above.

The maximum settable size will differ depending on models.

HAt the confirmation message, press the Y key. The backup area is then created.

IWhen the message [You must reboot in order to enable the Backup func- tion.] appears, remove the Product Recovery DVD-ROM, and press any key to restart the computer. The computer is restarted, then the backup process will begin.

JWhen the message [[Backup] is complete] appears, press the Ctrl + Alt + Del key to restart the computer.

CAUTION

zDo not press the Ctrl + Alt + Del key until the message is displayed.

KAfter logging on to Windows, a message will appear advising that a new device has been installed and that the computer must be restarted to enable the settings. Select [Yes] to restart the computer.

NOTE

zThe [Boot] menu in the Setup Utility is set to start up from the DVD-ROM & CD- R/RW drive. Change this setting if necessary.

zThe next time the backup or restore functions are executed, follow the proce- dure for [Backing Up and Restoring Data] (Î page 67).

Important Information

66