RQT9334
(ENG)
28
Network
Broadband network connection
The following services can be used when this unit is connected
to the internet via a b roadband connecti on.
≥Firmware can be updated (>31)
≥You can enjoy the BD-Live (>17)
≥You can enjoy the VIERA CA ST (>30)
≥Use shielded LAN cable s when connecting to peripheral
devices.
≥With installation where your broadband mod em is connected
directly to your PC, a router must be installed.
≥Use a router that supports 10BASE-T/100BASE-TX.
≥In case all available connection on your router is being used,
a hub or switch can be installed to prov ide additional
connections.
≥When operating the VIERA CAST, use high-speed internet
service no less than 1.5Mbps for SD (Standard Definition)
and 6 Mbps for HD (High Definition) picture quality by your
local broadband company.
jIf using slow Internet connection, the video may not be
displayed correctly.
≥Depending on a contrac t with your local broadband compan y,
it may be generating c ommunication charg es.
≥After physically connecting this unit to your broadband
connection, some configuration is required. (Dright)
≥Inserting any cable other than a LAN cable in the LAN
terminal can damage the unit.
Network settings
These settings are used if you con nect this unit to the Intern et.
≥The connection to the Internet may take time or the Internet
may not be connected depending on the connection
environment. (>29)
It is required that you use a broadba nd connection.
Preparation
≥Connect to a broadband network. (Dleft)
Always test the connection when a LAN cable is connected.
1Press [SETUP].
2Press [3,4] to select “Network” and
press [OK].
3Press [3,4] to select “IP Address/DNS

Settings” and press [OK].

4Press [3,4] to select “Connection Test”
and press [OK].
“Testing”: The te st is in progress.
“Pass”: The connection is completed.
Press [RETURN] to exit.
“Fail”: Please check the conne ction and settings .
(>29)
≥Perform the “Connect ion Test” also when any c hange was
made to the “IP Address/DNS Setting s”.
≥If the connection test fails, it may be necessary to set th e
MAC address of this unit at the router side. The MAC address
can be displayed by pr essing [SETUP] and selecting
“Network”.
LAN
Telecommunications
equipment (modem, etc.)
Straight LAN cable
(not included)
Broadband router, etc.
The unitInternet

Testing of “IP Address/DNS

Settings”

IP Address/DNS Settings
Connection Test
OnOn
OnOn
OnOn
㪄㪄㪄㪅㩷㪄㪄㪄㪅㩷㪄㪄㪄㪅㩷㪄㪄㪄㪄㪄㪄㪅㩷 㪄 㪄 㪄 㪅 㩷 㪄 㪄 㪄 㪅 㩷 㪄 㪄 㪄
㪄㪄㪄㪅㩷㪄㪄㪄㪅㩷㪄㪄㪄㪅㩷㪄㪄㪄㪄㪄㪄㪅㩷 㪄 㪄 㪄 㪅 㩷 㪄 㪄 㪄 㪅 㩷 㪄 㪄 㪄
㪄㪄㪄㪅㩷㪄㪄㪄㪅㩷㪄㪄㪄㪅㩷㪄㪄㪄㪄㪄㪄㪅㩷 㪄 㪄 㪄 㪅 㩷 㪄 㪄 㪄 㪅 㩷 㪄 㪄 㪄
㪄㪄㪄㪅㩷㪄㪄㪄㪅㩷㪄㪄㪄㪅㩷㪄㪄㪄㪄㪄㪄㪅㩷 㪄 㪄 㪄 㪅 㩷 㪄 㪄 㪄 㪅 㩷 㪄 㪄 㪄
㪄㪄㪄㪅㩷㪄㪄㪄㪅㩷㪄㪄㪄㪅㩷㪄㪄㪄㪄㪄㪄㪅㩷 㪄 㪄 㪄 㪅 㩷 㪄 㪄 㪄 㪅 㩷 㪄 㪄 㪄
IP Address Auto Conguration (DHCP)
IP Address
Subnet Mask
Default Gateway
DNS Auto Conguration (DHCP)
Primary DNS
Secondary DNS
Auto Detect Connection Speed
Connection Speed Setting


RETURN
OK
RETURN
Network
IP Address/DNS Settings
Proxy Server Settings
Network Service
MAC Address: xx-xx-xx-xx-xx-xx
OK
DMPB15P-RQT9334_eng.book 28 ページ ２００９年３月２８日　土曜日　午後２時３９分