Getting started
RQT9334
(ENG)
13
Adjusting the pictures on the LCD screen
1Press [LCD].
≥
It is also possible to display with the f ollowing procedures.
2Select the item with [3,4].
3Change the setting with [3,4,2,1].
≥Underlined items are the factory presets.
∫When selecting other settings than “AUX” with
[AVSELECT]
Picture:Adjusting image quality
Monitor:Displ aying images
∫When selecting “AUX” with [AVSELECT] (>25)
PICTURE:Adjusting image quality
MONITOR:Displaying images
≥If you are not using the LCD on this unit, sele ct “Off (OFF)” to
conserve power. (The [Í] indicator flashes.)
≥If the settings in “PICTURE” are changed when “AUX” is
selected, the settings in “Pic ture” will also change.
The settings will chan ge in the same way even when
something other than “AUX” is selected.
To exit the screen
Press [LCD] or [RETURN].
To display images when the “Monitor (MONITOR)” is
set to “Off (OFF)”
Press [LCD] or [SUBM ENU]
Loading the disc or SD card
1Open the screen and press [OPEN].
2Set the disc holding the unit with your hand

and close the lid.

3Close the screen.
≥Some discs may start playing when it is loaded with the unit
turned on.
≥About discs with a cartridge
jBD-RE with a cartridge: It cannot be u sed with this unit. (It
cannot be used even if the disc is taken ou t from the
cartridge.)
jDVD-RAM, 8 cm disc: Remove the di sc from the cartridge
and set the disc in the tray
jPlace the disc back into the cartridge for storage to prevent
dirt and scratches after use.
≥Do not touch the lens as it m ay
make it dirty.
1Open the cover at the side of the unit.
2Insert the SD card into the SD card slot.
≥Press on the center of the card un til it clicks into place.
3Close the cover.
To remove the card
In step 2 above, press the center of the card until it “clicks”, and
pull the card out straight.
1Press [SUBMENU].
2
Select “Other Functions” wit h
3
,
4
], and select
[OK].
3Select “LCD Menu” with 3,4], and select
[OK].
≥Standard: Standard
≥Dynamic: Picture with high contrast
≥Night: Picture suitable for view ing in dark places
≥User jBrightness :j5 to +5
jColor :j5 to +5
≥On:
≥Off:
Image display
No image
≥STANDARD: Standard
≥DYNAMIC: Picture with high contrast
≥NIGHT: Picture suitable for view ing in dark places
≥USER jBRIGHTNESS :j5 to 5
jCOLOR :j5 to 5
≥NORMAL:
≥FULL:
≥OFF:
When you want to view 4:3 images
When you want to view 16:9 images
No image
LCD Menu
Picture Dynamic
Monitor On
Brightness
Color
RETURN
SUB
MENU

Disc

SD card

Label side up
(Double-sided disc:
place the label side
up that you want to
play back)
Clicks
into place.
Lens (>below)
Lens
Label side
Insert the card with
the corner cut-side
up.
DMPB15P-RQT9334_eng.book 13 ページ ２００９年３月２８日　土曜日　午後２時３９分